ContiTech AGDSTD 1624 DS8M CXP
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DSTD 1624 DS8M CXP
Trademark : CONTI® SYNCHROTWIN CXP
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 7.3 |
| Tooth height | ht | мм | 3 |
| Nominal length | Lp/Lw | мм | 1624 |
| Number of teeth |
203 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
K33 PU(36x46x7,3)
Manufacturer: KASTAS
Sizes: 36x46x7,3 (mm)
6 NBR 90(185,00x06,00)
Manufacturer: KASTAS
T10 DD
Manufacturer: ContiTech AG
AT10 DD
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (ARE-B)
Manufacturer: FEKO
Sizes: 23x34.40/38x8.45 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 40x55x10 (mm)
SEALS (REINFORCED SEAL) (AY)
Manufacturer: FEKO
Sizes: 15x26x7 (mm)
ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ 32322-A-N11CA
Manufacturer: FAG
Sizes: 110x240x169 (mm)
1000H
Manufacturer: ContiTech AG
A 123 13x3125 Li / 3155 Ld
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
