ContiTech AGDHTD 1400 D14M CXP
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 1400 D14M CXP
Trademark : CONTI® SYNCHROTWIN CXP
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 14 |
| Thickness | hs | мм | 15.2 |
| Tooth height | ht | мм | 6.1 |
| Nominal length | Lp/Lw | мм | 1400 |
| Number of teeth |
100 | ||
| Minimum pulley diameter | dw | мм | 124.78 |
AT10 920 GEN III
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 42x63x7 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 160x182x18 (mm)
SPB 1975
Manufacturer: ContiTech AG
KSO NBR 70(9 mm nbr oring cord)
Manufacturer: KASTAS
Подшипник 7019 C
Manufacturer: NSK-RHP
Sizes: 95x145x24 (mm)
Weight:: 1.42 (kg)
K73 POLYESTER/PTFE(195x200x25)
Manufacturer: KASTAS
Sizes: 195x200x25 (mm)
4 NBR 90(072,00x04,00)
Manufacturer: KASTAS
4 NBR 90(080,00x04,00)
Manufacturer: KASTAS
K48 (200x180x16)
Manufacturer: KASTAS
Sizes: 200x180x16 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
