ContiTech AGDHTD 1800 D8M CXP
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 1800 D8M CXP
Trademark : CONTI® SYNCHROTWIN CXP
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 8.2 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 1800 |
| Number of teeth |
225 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
ContiTech STD 8M 30 HP-PAZ
Manufacturer: ContiTech AG
K01 (200x230x60)
Manufacturer: KASTAS
Sizes: 200x230x60 (mm)
Подшипник 7221DT
Manufacturer: NACHI
Sizes: 105x190x36 (mm)
Weight:: 3.93 (kg)
322XL
Manufacturer: ContiTech AG
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 42.00x50.00x4.00 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 12x45x7 (mm)
C 101 22x2565 Li / 2624 Ld
Manufacturer: ContiTech AG
Подшипник 53320
Manufacturer: NACHI
Sizes: 100x170x59.2 (mm)
Weight:: 0.73 (kg)
22x4166 C 164
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
