ContiTech AGDHTD 656 D8M CXP
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 656 D8M CXP
Trademark : CONTI® SYNCHROTWIN CXP
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 8.2 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 656 |
| Number of teeth |
82 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
1288 RPP14 DD MEGADYNE ISORAN
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 34.52x41.58x3.53 (mm)
Подшипник NU 1044
Manufacturer: NSK-RHP
Sizes: 220x310x56 (mm)
Weight:: 18.2 (kg)
SPC 5600 Ld
Manufacturer: ContiTech AG
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНЫЙ 61801-2Z
Manufacturer: FAG
Sizes: 12x21x5 (mm)
AT5 860 GEN III
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (FST)
Manufacturer: FEKO
Sizes: 59x72x12/8 (mm)
Mechanical seal RM 551B
Manufacturer: RiMi
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 80x100x8 (mm)
Подшипник 5312N
Manufacturer: NACHI
Sizes: 60x130x54 (mm)
Weight:: 3.16 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
