ContiTech AGDHTD 740 D5M CXP
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 740 D5M CXP
Trademark : CONTI® SYNCHROTWIN CXP
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 5.4 |
| Tooth height | ht | мм | 2.1 |
| Nominal length | Lp/Lw | мм | 740 |
| Number of teeth |
148 | ||
| Minimum pulley diameter | dw | мм | 22.28 |
Bearing 6408N (50408)
Manufacturer: TMB
Sizes: 40x110x27 (mm)
Weight:: 1.25 (kg)
AT5 DD
Manufacturer: ContiTech AG
4 NBR 70(310,00x04,00)
Manufacturer: KASTAS
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 165x190x17 (mm)
V 402/7 K
Manufacturer: ContiTech AG
Krestovina 28,6x91,5
Manufacturer: TOYO
Подшипник 6864
Manufacturer: NACHI
Sizes: 320x400x38 (mm)
Weight:: 10.9 (kg)
Подшипник 74525/74850
Manufacturer: NSK-RHP
Sizes: 133.35x215.9x47.625 (mm)
Weight:: 6.43 (kg)
920 SLV8 DD MEGADYNE ISORAN
Manufacturer: ContiTech AG
Bearings KRV16-PP-A
Manufacturer: INA-FAG
Weight:: 0.02 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
