ContiTech AG750 DH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 750 DH
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 6 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 750 |
| Nominal length | Lp/Lw | мм | 1905 |
| Number of teeth |
150 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНЫЙ 6008-2Z
Manufacturer: FAG
Sizes: 40x68x15 (mm)
A 109 13x2770 Li / 2800 Ld
Manufacturer: ContiTech AG
Bearing ASNU 90
Manufacturer: ETERNO
Sizes: 90x190x64 (mm)
Weight:: 8200 (kg)
SEALS (REINFORCED SEAL) (FY-P)
Manufacturer: FEKO
Sizes: 90x105x6 (mm)
AT10 DD
Manufacturer: ContiTech AG
Подшипник 54230X
Manufacturer: NSK-RHP
Sizes: 150x215x95.6 (mm)
Weight:: 0.73 (kg)
MEGADYNE ISORAN 632 GLD8 ( RPP8 632 GOLD )
Manufacturer: ContiTech AG
Подшипник NU 240 E
Manufacturer: NACHI
Sizes: 200x360x58 (mm)
Weight:: 29.5 (kg)
K68 POM(45x51x8)
Manufacturer: KASTAS
Sizes: 45x51x8 (mm)
Корпус UCTL205+WL200
Manufacturer: NACHI
Weight:: 6.7 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
