ContiTech AG750 DH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 750 DH
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 6 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 750 |
| Nominal length | Lp/Lw | мм | 1905 |
| Number of teeth |
150 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
Bearing NA4920 2RS
Manufacturer: ETERNO
Sizes: 100x115x140 (mm)
Weight:: 1.98 (kg)
K95 NBR(29x35x6 )
Manufacturer: KASTAS
Sizes: 29x35x6 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TBG)
Manufacturer: STO
Sizes: 145x175x14 (mm)
A 99 13x2515 Li / 2545 Ld
Manufacturer: ContiTech AG
K36 (88,9x101,6x10)
Manufacturer: KASTAS
Sizes: 88,9x101,6x10 (mm)
Bearing 61901-RZP5 (D1160901)
Manufacturer: TMB
Sizes: 10x24x6 (mm)
Weight:: 0.011 (kg)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 29x54x9 (mm)
AT20 DD
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 15x47x10 (mm)
ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ PCJ15
Manufacturer: INA-FAG
Weight:: 3.9 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
