ContiTech AG730 DH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 730 DH
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 6 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 730 |
| Nominal length | Lp/Lw | мм | 1854.2 |
| Number of teeth |
146 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
K18 (90x72x22,5x3,60)
Manufacturer: KASTAS
Sizes: 90x72x22,5 (mm)
Подшипник 54209U
Manufacturer: NSK-RHP
Sizes: 45x73x45 (mm)
Weight:: 0.73 (kg)
SEALS (REINFORCED SEAL) (A)
Manufacturer: FEKO
Sizes: 35.70x48.20x5.80 (mm)
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-СФЕРИЧЕСКИЙ 1313-K-TVH-C3 + H313
Manufacturer: FAG
Sizes: 60x140x33 (mm)
Подшипник 150TAD20
Manufacturer: NACHI
Sizes: 150x225x90 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 10x31x7 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 135x170x12 (mm)
K29 PU/POM(110x125,5x6,3)
Manufacturer: KASTAS
Sizes: 110x125,5x6,3 (mm)
MEGADYNE ISORAN 510 RPP3 ( RPP 3M 510 )
Manufacturer: ContiTech AG
K33 PU(300x330x17)
Manufacturer: KASTAS
Sizes: 300x330x17 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
