ContiTech AG700 DH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 700 DH
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 6 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 700 |
| Nominal length | Lp/Lw | мм | 1778 |
| Number of teeth |
140 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
SEALS (REINFORCED SEAL) (A)
Manufacturer: FEKO
Sizes: 30x68x10 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 184.00x210.00x13.00 (mm)
RPP8 5112 ( RPP 8 5112 -V, -M, -MFX )
Manufacturer: ContiTech AG
Подшипник NU 1052
Manufacturer: NACHI
Sizes: 260x400x65 (mm)
Weight:: 29.6 (kg)
Подшипник FWF-182314-E
Manufacturer: NSK-RHP
Sizes: 18x23x14 (mm)
Weight:: 0.01 (kg)
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-СФЕРИЧЕСКИЙ 1309-K-TVH-C3
Manufacturer: FAG
Sizes: 45x100x25 (mm)
K21 NBR(12x18x5)
Manufacturer: KASTAS
Sizes: 12x18x5 (mm)
Подшипник 232/530CAE4
Manufacturer: NSK-RHP
Sizes: 530x980x355 (mm)
Weight:: 1170 (kg)
MEGADYNE ISORAN 270 SLV5 ( RPP5 270 SILVER )
Manufacturer: ContiTech AG
XPZ 1120 Lw / Ld ( XPZ1120 )
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
