ContiTech AG630 DH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 630 DH
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 6 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 630 |
| Nominal length | Lp/Lw | мм | 1600.2 |
| Number of teeth |
126 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 39x60x9 (mm)
Подшипник HR30334J
Manufacturer: NSK-RHP
Sizes: 170x360x80 (mm)
Weight:: 34.5 (kg)
Bearing NF208 (12208)
Manufacturer: TMB
Sizes: 40x80x18 (mm)
Weight:: 0.43 (kg)
T5 DD
Manufacturer: ContiTech AG
ПОДШИПНИК ИГОЛЬЧАТЫЙ РАДИАЛЬНЫЙ K30X37X18
Manufacturer: INA-FAG
Weight:: 0.03 (kg)
Корпус UKPX20+H2320
Manufacturer: NACHI
Weight:: 32.1 (kg)
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 85x105x13 (mm)
3.53 NBR 90(041,28x03,53)
Manufacturer: KASTAS
Bearing QJ220M (176220H)
Manufacturer: TMB
Sizes: 100x180x34 (mm)
Weight:: 4.05 (kg)
O-RING
Manufacturer: NQK SF
Sizes: 195.00x200.30x2.65 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
