ContiTech AG600 DH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 600 DH
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 6 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 600 |
| Nominal length | Lp/Lw | мм | 1524 |
| Number of teeth |
120 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
Подшипник 23120EX1K
Manufacturer: NACHI
Sizes: 100x165x52 (mm)
Weight:: 4.49 (kg)
Подшипник F634ZZ1
Manufacturer: NSK-RHP
Sizes: 4x18x5 (mm)
Weight:: 5.62 (kg)
Подшипник 24024EX1K30
Manufacturer: NACHI
Sizes: 120x180x60 (mm)
Weight:: 5.36 (kg)
Подшипник 6208-2NSE9
Manufacturer: NACHI
Sizes: 40x80x18 (mm)
Weight:: 0.366 (kg)
A 124 13x3150 Li / 3180 Ld
Manufacturer: ContiTech AG
Корпус UKPK313+H2313
Manufacturer: NACHI
Weight:: 12.1 (kg)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TB)
Manufacturer: STO
Sizes: 50x80x8 (mm)
RPP8 7584 ( RPP 8 7584 -V, -M, -MFX )
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (FH)
Manufacturer: FEKO
Sizes: 60x80x10/15.50 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 10x23x8 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
