ContiTech AG600 DH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 600 DH
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 6 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 600 |
| Nominal length | Lp/Lw | мм | 1524 |
| Number of teeth |
120 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
O-RING
Manufacturer: NQK SF
Sizes: 198.00x212.00x7.00 (mm)
K68 POM(50,8x57,15x12,6)
Manufacturer: KASTAS
Sizes: 50,8x57,15x12,6 (mm)
K21 NBR(45x57x6)
Manufacturer: KASTAS
Sizes: 45x57x6 (mm)
Подшипник NNCF4912CV
Manufacturer: SKF
Sizes: 60x85x25 (mm)
Weight:: 0.48 (kg)
XPZ 1727 Lw / Ld ( XPZ1727 )
Manufacturer: ContiTech AG
SPZ 2100
Manufacturer: ContiTech AG
Подшипник NU 1080
Manufacturer: NSK-RHP
Sizes: 400x550x90 (mm)
Weight:: 88.2 (kg)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 33x62x10 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TC )
Manufacturer: STO
Sizes: 20x34x7 (mm)
XT200 PU(30x45x10)
Manufacturer: KASTAS
Sizes: 30x45x10 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
