ContiTech AG540 DH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 540 DH
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 6 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 540 |
| Nominal length | Lp/Lw | мм | 1371.6 |
| Number of teeth |
108 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TC)
Manufacturer: STO
Sizes: 580x620x20.6 (mm)
DHTD 656 D8M
Manufacturer: ContiTech AG
Bearing FC69726
Manufacturer: INA-FAG
Sizes: 17.100x37.100x13.920 (mm)
Weight:: 0.063 (kg)
AT10 DD
Manufacturer: ContiTech AG
Корпус KHPFL205A
Manufacturer: NACHI
Weight:: 0.40 (kg)
Bearing 23136 MW33
Manufacturer: ETERNO
Sizes: 180x300x96 (mm)
Weight:: 25.2 (kg)
Bearing 62282RS (180228K)
Manufacturer: TMB
Sizes: 140x250x42 (mm)
Weight:: 7.75 (kg)
K21 NBR(20x28x5)
Manufacturer: KASTAS
Sizes: 20x28x5 (mm)
ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ 32232-A-N11CA
Manufacturer: FAG
Sizes: 160x290x168 (mm)
A 40,5 13x1030 Li / 1060 Ld
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
