ContiTech AG510 DH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 510 DH
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 0.5 |
Tooth step | t | мм | 12.7 |
Thickness | hs | мм | 6 |
Tooth height | ht | мм | 2.29 |
Nominal length | Lp/Lw | дюйм (1/10) | 510 |
Nominal length | Lp/Lw | мм | 1295.4 |
Number of teeth |
102 | ||
Minimum pulley diameter | dw | мм | 64.68 |
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 36x43x8 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 72x82x10 (mm)
K36 (85x97x9,6)
Manufacturer: KASTAS
Sizes: 85x97x9,6 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 120x180x15 (mm)
K26 NBR 80(26x8x22)
Manufacturer: KASTAS
Sizes: 26x8x22 (mm)
MEGADYNE ISORAN 3304 RPP14 ( RPP 14M 3304 )
Manufacturer: ContiTech AG
Bearing 812/530
Manufacturer: INA-FAG
Sizes: 530x710x140 (mm)
Weight:: 153.750 (kg)
Подшипник NU 2305
Manufacturer: NACHI
Sizes: 25x62x24 (mm)
Weight:: 0.34 (kg)
K17 PTFE/NBR(415x390,5x8,1)
Manufacturer: KASTAS
Sizes: 415x390,5x8,1 (mm)
K18 (110x92x22,5)
Manufacturer: KASTAS
Sizes: 110x92x22,5 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.