ContiTech AG480 DH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 480 DH
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 6 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 480 |
| Nominal length | Lp/Lw | мм | 1219.2 |
| Number of teeth |
96 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TGRY)
Manufacturer: STO
Sizes: 80x135x12/26.5 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 200.00x223.00x11.50 (mm)
SEALS (REINFORCED SEAL) (SC)
Manufacturer: FEKO
Sizes: 35x60/66x13/19 (mm)
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-УПОРНЫЙ 71814-B-TVH
Manufacturer: FAG
Sizes: 70x90x10 (mm)
K21 NBR(50x60x8)
Manufacturer: KASTAS
Sizes: 50x60x8 (mm)
Подшипник 1302
Manufacturer: NSK-RHP
Sizes: 15x42x13 (mm)
5.7 NBR 70(159,30x05,70)
Manufacturer: KASTAS
O-RING
Manufacturer: NQK SF
Sizes: 28.17x38.77x5.30 (mm)
T5 180 ( Т5 180 ) MEGADYNE MEGAPOWER
Manufacturer: ContiTech AG
DSTD 720 DS8M
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
