ContiTech AG420 DH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 420 DH
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 6 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 420 |
| Nominal length | Lp/Lw | мм | 1066.8 |
| Number of teeth |
84 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
SEALS (REINFORCED SEAL) (C)
Manufacturer: FEKO
Sizes: 72x87.22x12 (mm)
Подшипник 757/752
Manufacturer: NSK-RHP
Sizes: 82.55x161.925x47.625 (mm)
Weight:: 4.4 (kg)
K06 PU(12x20x4,7/7)
Manufacturer: KASTAS
Sizes: 12x20x4,7/7 (mm)
K06 NBR(14x20x3,5/5)
Manufacturer: KASTAS
Sizes: 14x20x3,5/5 (mm)
GEAR PULLEYS 8M-38S 95.17 (8M-38S 95.17/36)
Manufacturer: BBC
420 H DD MEGADYNE ISORAN
Manufacturer: ContiTech AG
Подшипник 230/530CAE4
Manufacturer: NSK-RHP
Sizes: 530x780x185 (mm)
Weight:: 298 (kg)
V 226/5 F
Manufacturer: ContiTech AG
Подшипник NU 1009
Manufacturer: NSK-RHP
Sizes: 45x67.5x16 (mm)
Weight:: 0.279 (kg)
K81 TPE(61x66x1,4)
Manufacturer: KASTAS
Sizes: 61x66x1,4 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
