ContiTech AG390 DH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 390 DH
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 6 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 390 |
| Nominal length | Lp/Lw | мм | 990.6 |
| Number of teeth |
78 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
Подшипник 6219NSL
Manufacturer: NACHI
Sizes: 95x170x32 (mm)
Weight:: 2.62 (kg)
Подшипник 47686/47620
Manufacturer: NSK-RHP
Sizes: 82.55x133.35x33.338 (mm)
Weight:: 1.757 (kg)
SEALS (REINFORCED SEAL) (FH)
Manufacturer: FEKO
Sizes: 70x80x710 (mm)
Торцевое уплотнение RM U4(250)-95
Manufacturer: RiMi
Bearing NUP306 (92306)
Manufacturer: TMB
Sizes: 30x72x19 (mm)
Weight:: 0.38 (kg)
SEALS (REINFORCED SEAL) (ARSSE)
Manufacturer: FEKO
Sizes: 45x72/86x8/12 (mm)
K69 POM(34x28x9,5)
Manufacturer: KASTAS
Sizes: 34x28x9,5 (mm)
XPA 2582 Lw / Ld ( ХРА 2582 )
Manufacturer: ContiTech AG
Подшипник N 1088
Manufacturer: NACHI
Sizes: 440x597x94 (mm)
Weight:: 110 (kg)
Bearing 32019 (2007119E)
Manufacturer: TMB
Sizes: 95x145x32 (mm)
Weight:: 1.85 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
