ContiTech AG360 DH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 360 DH
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 0.5 |
Tooth step | t | мм | 12.7 |
Thickness | hs | мм | 6 |
Tooth height | ht | мм | 2.29 |
Nominal length | Lp/Lw | дюйм (1/10) | 360 |
Nominal length | Lp/Lw | мм | 914.4 |
Number of teeth |
72 | ||
Minimum pulley diameter | dw | мм | 64.68 |
Bearing 26RT19
Manufacturer: INA-FAG
Sizes: 66.650x110.287x35.458 (mm)
Weight:: 1.317 (kg)

SEALS (REINFORCED SEAL) (A)
Manufacturer: FEKO
Sizes: 34x72x14.50 (mm)

A 118 13x3000 Li / 3030 Ld
Manufacturer: ContiTech AG

Подшипник NU 1038
Manufacturer: NSK-RHP
Sizes: 190x265x46 (mm)
Weight:: 10.7 (kg)

K68 POM(94x100x15)
Manufacturer: KASTAS
Sizes: 94x100x15 (mm)

T10 DD
Manufacturer: ContiTech AG

Bearing AS0619
Manufacturer: INA-FAG
Sizes: 6x19x1 (mm)
Weight:: 0.002 (kg)

Подшипник 5215AZZ
Manufacturer: NACHI
Sizes: 75x130x41.3 (mm)
Weight:: 1.91 (kg)

Bearing 23236 KMW33
Manufacturer: ETERNO
Sizes: 180x320x112 (mm)
Weight:: 39 (kg)

Подшипник HR30316DJ
Manufacturer: NSK-RHP
Sizes: 80x170x42.5 (mm)
Weight:: 4.07 (kg)


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.