ContiTech AG330 DH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 330 DH
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 6 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 330 |
| Nominal length | Lp/Lw | мм | 838.2 |
| Number of teeth |
66 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
Подшипник NJ 310 EW
Manufacturer: NSK-RHP
Sizes: 50x110x27 (mm)
Weight:: 1.3 (kg)
ПОДШИПНИК КОМБИНИРОВАННЫЙ YRT395
Manufacturer: INA-FAG
Sizes: 395x525x20 (mm)
Weight:: 33 (kg)
ПОДШИПНИК РОЛИКОВЫЙ РАДИАЛЬНЫЙ NU1996-M1
Manufacturer: FAG
Sizes: 480x650x78 (mm)
XPB 1727 Lw / Ld ( ХРВ 1727 )
Manufacturer: ContiTech AG
ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ 30220-A-N11CA
Manufacturer: FAG
Sizes: 100x180x74 (mm)
Подшипник 53256U
Manufacturer: NACHI
Sizes: 280x380x94 (mm)
Weight:: 225 (kg)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 29x47x10 (mm)
ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ PTUE20
Manufacturer: INA-FAG
Bearing WS81132
Manufacturer: INA-FAG
Sizes: 160x200x9.5 (mm)
Weight:: 0.842 (kg)
O-RING
Manufacturer: NQK SF
Sizes: 69.50x73.50x2.00 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
