ContiTech AG300 DH
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 300 DH
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 0.5 |
| Tooth step | t | мм | 12.7 |
| Thickness | hs | мм | 6 |
| Tooth height | ht | мм | 2.29 |
| Nominal length | Lp/Lw | дюйм (1/10) | 300 |
| Nominal length | Lp/Lw | мм | 762 |
| Number of teeth |
60 | ||
| Minimum pulley diameter | dw | мм | 64.68 |
Подшипник 7205 B
Manufacturer: NSK-RHP
Sizes: 25x52x15 (mm)
Weight:: 0.133 (kg)
Mechanical seal RM 560C-75
Manufacturer: RiMi
Bearing AC200300 (71944X2A/YAS)
Manufacturer: TMB
Sizes: 220x300x35 (mm)
Подшипник 23944EK
Manufacturer: NACHI
Sizes: 220x300x60 (mm)
Weight:: 12.6 (kg)
Bearing NJ2236
Manufacturer: ETERNO
Sizes: 180x320x86 (mm)
Weight:: 32 (kg)
Bearing NA4980
Manufacturer: ETERNO
Sizes: 400x450x540 (mm)
Weight:: 94.4 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 23x40x10 (mm)
Подшипник 6216-2NK
Manufacturer: NACHI
Sizes: 80x140x26 (mm)
Weight:: 1.40 (kg)
Bearing NU311EM (32311EH)
Manufacturer: TMB
Sizes: 55x120x29 (mm)
Weight:: 1.45 (kg)
C 96 22x2440 Li / 2499 Ld
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
