ContiTech AGDSTD 1800 DS8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DSTD 1800 DS8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 7.3 |
| Tooth height | ht | мм | 3 |
| Nominal length | Lp/Lw | мм | 1800 |
| Number of teeth |
225 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 17x32x7 (mm)
HTD 8M 6776 ( HTD8M 6776 -V, -M, -MFX )
Manufacturer: ContiTech AG
K37 (55x75x14)
Manufacturer: KASTAS
Sizes: 55x75x14 (mm)
Manufacturer: ContiTech AG
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TGL)
Manufacturer: STO
Sizes: 36x54x11 (mm)
K73 POLYESTER/PTFE(85x90x30)
Manufacturer: KASTAS
Sizes: 85x90x30 (mm)
SPC 10600 Ld
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 310x350x20 (mm)
K42 (200x175x45)
Manufacturer: KASTAS
Sizes: 200x175x45 (mm)
K21 PU(12x18x5)
Manufacturer: KASTAS
Sizes: 12x18x5 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
