ContiTech AGDSTD 1408 DS8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DSTD 1408 DS8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 7.3 |
| Tooth height | ht | мм | 3 |
| Nominal length | Lp/Lw | мм | 1408 |
| Number of teeth |
176 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
Manufacturer: ContiTech AG
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 42x70x10 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 355.00x365.60x5.30 (mm)
K23 NBR(22x16x5,5)
Manufacturer: KASTAS
Sizes: 22x16x5,5 (mm)
Mechanical seal RM 560A-20
Manufacturer: RiMi
K78 Aramid Phenolic/Graphite(85x90x9,7 )
Manufacturer: KASTAS
Sizes: 85x90x9,7 (mm)
K37 (80x100x14)
Manufacturer: KASTAS
Sizes: 80x100x14 (mm)
Bearing 22238 KMW33
Manufacturer: ETERNO
Sizes: 190x340x92 (mm)
Weight:: 36.8 (kg)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 16x38x7 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
