ContiTech AGDSTD 1056 DS8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DSTD 1056 DS8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 7.3 |
| Tooth height | ht | мм | 3 |
| Nominal length | Lp/Lw | мм | 1056 |
| Number of teeth |
132 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
K36 (16x24x7)
Manufacturer: KASTAS
Sizes: 16x24x7 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 59.00x69.60x5.30 (mm)
XPB 2360 Lw / Ld ( ХРВ 2360 )
Manufacturer: ContiTech AG
ATG10 5030 MFX - Megaflex ( ATK10 5030 BFX - BRECOFLEX )
Manufacturer: ContiTech AG
Mechanical seal RM 70-15
Manufacturer: RiMi
RPP8 6392 ( RPP 8 6392 -V, -M, -MFX )
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 248.00x260.00x6.00 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TC)
Manufacturer: STO
Sizes: 20x30x6 (mm)
SPB 3270
Manufacturer: ContiTech AG
D 162 32x4115 Li / 4191 Ld
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
