ContiTech AGDSTD 960 DS8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DSTD 960 DS8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 7.3 |
| Tooth height | ht | мм | 3 |
| Nominal length | Lp/Lw | мм | 960 |
| Number of teeth |
120 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
O-RING
Manufacturer: NQK SF
Sizes: 84.00x89.00x2.50 (mm)
Торцевое уплотнение RM U4(250)-48
Manufacturer: RiMi
Krestovina 30x85,5
Manufacturer: TOYO
Подшипник 3479/3420
Manufacturer: NSK-RHP
Sizes: 36.512x79.375x29.37 (mm)
Weight:: 0.688 (kg)
2 NBR 70(036,00x02,00)
Manufacturer: KASTAS
Manufacturer: ContiTech AG
B 137,5 3550 Le/ 3488 Li
Manufacturer: ContiTech AG
HTD 8M 4056 ( HTD8M 4056 -V, -M, -MFX )
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (FYT)
Manufacturer: FEKO
Sizes: 41.70x55.18x10 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 66.5x89x13 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
