ContiTech AGDSTD 656 DS8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DSTD 656 DS8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | мм | 8 |
Thickness | hs | мм | 7.3 |
Tooth height | ht | мм | 3 |
Nominal length | Lp/Lw | мм | 656 |
Number of teeth |
82 | ||
Minimum pulley diameter | dw | мм | 56.02 |
17x3835 B 151
Manufacturer: ContiTech AG

MEGADYNE ISORAN 4410 GLD14 ( RPP14 4410 GOLD )
Manufacturer: ContiTech AG

SEALS (REINFORCED SEAL) (A-B)
Manufacturer: FEKO
Sizes: 31.75x44.65x6.35 (mm)

SEALS (REINFORCED SEAL) (O)
Manufacturer: FEKO
Sizes: 50x68x9 (mm)

K781 PTFE(80x85x30 )
Manufacturer: KASTAS
Sizes: 80x85x30 (mm)

K781 PTFE(115x120x60 )
Manufacturer: KASTAS
Sizes: 115x120x60 (mm)

10X1575 Z 62
Manufacturer: ContiTech AG

Подшипник 6812Z
Manufacturer: NACHI
Sizes: 60x78x10 (mm)
Weight:: 0.106 (kg)

4 FKM 80(042,00x04,00 )
Manufacturer: KASTAS

O-RING
Manufacturer: NQK SF
Sizes: 83.50x90.50x3.50 (mm)


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.