ContiTech AGDHTD 2310 D14M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 2310 D14M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 14 |
| Thickness | hs | мм | 15.2 |
| Tooth height | ht | мм | 6.1 |
| Nominal length | Lp/Lw | мм | 2310 |
| Number of teeth |
165 | ||
| Minimum pulley diameter | dw | мм | 124.78 |
CX 55 CX 1462 Ld
Manufacturer: ContiTech AG
ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ PMEY30-N
Manufacturer: INA-FAG
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 41x56x10 (mm)
D 120 32x3050 Li / 3126 Ld
Manufacturer: ContiTech AG
ШАРИКОПОДШИПНИК РАДИАЛЬНО-УПОРНЫЙ С ЧЕТЫРЕХТОЧЕЧНЫМ КОНТАКТОМ QJ332-N2-MPA
Manufacturer: FAG
Sizes: 160x340x68 (mm)
Корпус UCFL320
Manufacturer: NACHI
Weight:: 26.5 (kg)
AT10 DD
Manufacturer: ContiTech AG
69.6 MXL
Manufacturer: ContiTech AG
K07 NBR(65x75x7/10)
Manufacturer: KASTAS
Sizes: 65x75x7/10 (mm)
SEALS (REINFORCED SEAL) (TFS)
Manufacturer: FEKO
Sizes: 60x79.38x8 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
