ContiTech AGDHTD 2100 D14M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 2100 D14M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 14 |
| Thickness | hs | мм | 15.2 |
| Tooth height | ht | мм | 6.1 |
| Nominal length | Lp/Lw | мм | 2100 |
| Number of teeth |
150 | ||
| Minimum pulley diameter | dw | мм | 124.78 |
R-2240
Manufacturer: ContiTech AG
AT10 DD
Manufacturer: ContiTech AG
K22 NBR(42x53x6,7)
Manufacturer: KASTAS
Sizes: 42x53x6,7 (mm)
Bearings NKI65/25
Manufacturer: INA-FAG
Sizes: 65x90x25 (mm)
Weight:: 0.467 (kg)
BB121 ( ВВ 121 ) Le= 3142 мм
Manufacturer: ContiTech AG
RPP14 3136 ( RPP 14 3136 -V, -M, -MFX )
Manufacturer: ContiTech AG
AT5 DD
Manufacturer: ContiTech AG
K23 NBR(22,22x12,7x6,35)
Manufacturer: KASTAS
Sizes: 22,22x12,7x6,35 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 36.60x47x7 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 31.80x36.60x2.40 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
