ContiTech AGDHTD 2100 D14M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 2100 D14M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | мм | 14 |
Thickness | hs | мм | 15.2 |
Tooth height | ht | мм | 6.1 |
Nominal length | Lp/Lw | мм | 2100 |
Number of teeth |
150 | ||
Minimum pulley diameter | dw | мм | 124.78 |
SEALS (REINFORCED SEAL) (FY)
Manufacturer: FEKO
Sizes: 36x41.75x3 (mm)

SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 225x255x15 (mm)

Подшипник 53220
Manufacturer: NSK-RHP
Sizes: 100x150x40.9 (mm)
Weight:: 225 (kg)

Manufacturer: ContiTech AG

AT3 600 F E3/8
Manufacturer: ContiTech AG

AT20 DD
Manufacturer: ContiTech AG

K68 POM(63x68x9,5)
Manufacturer: KASTAS
Sizes: 63x68x9,5 (mm)

V 870/9 F
Manufacturer: ContiTech AG

K73 POLYESTER/PTFE(115x120x9,7)
Manufacturer: KASTAS
Sizes: 115x120x9,7 (mm)

HTD 8M 1560 ( HTD8M 1560 -V, -M, -MFX )
Manufacturer: ContiTech AG


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.