ContiTech AGDHTD 1890 D14M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 1890 D14M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 14 |
| Thickness | hs | мм | 15.2 |
| Tooth height | ht | мм | 6.1 |
| Nominal length | Lp/Lw | мм | 1890 |
| Number of teeth |
135 | ||
| Minimum pulley diameter | dw | мм | 124.78 |
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 42x68x10 (mm)
Z 28 10x710 Li / 733 Ld
Manufacturer: ContiTech AG
K78 Aramid Phenolic/Graphite(80x85x15 )
Manufacturer: KASTAS
Sizes: 80x85x15 (mm)
Bearing NU1016M (32116H)
Manufacturer: TMB
Sizes: 80x125x22 (mm)
Weight:: 0.88 (kg)
ПОДШИПНИК ШПИНДЕЛЬНЫЙ HCS71909-E-T-P4S
Manufacturer: FAG
Sizes: 45x68x12 (mm)
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-УПОРНЫЙ ZKLDF150
Manufacturer: INA-FAG
Sizes: 150x240x40 (mm)
Weight:: 7.5 (kg)
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 230x252x10 (mm)
STD 824 S8M CXP
Manufacturer: ContiTech AG
Bearing NUP317EM (92317EH)
Manufacturer: TMB
Sizes: 85x180x41 (mm)
Weight:: 4.9 (kg)
Подшипник HR32906J
Manufacturer: NSK-RHP
Sizes: 30x47x12 (mm)
Weight:: 0.074 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
