ContiTech AGDHTD 1440 D8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 1440 D8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 8 |
Thickness | hs | мм | 8.2 |
Tooth height | ht | мм | 3.4 |
Nominal length | Lp/Lw | мм | 1440 |
Number of teeth |
180 | ||
Minimum pulley diameter | dw | мм | 56.02 |
Bearing 3211 J-2RS
Manufacturer: INA-FAG
Sizes: 55x100x33.300 (mm)
Weight:: 1.000 (kg)

Mechanical seal RM 104-22
Manufacturer: RiMi

K07 PU(20x30x10/7)
Manufacturer: KASTAS
Sizes: 20x30x10/7 (mm)

K21 PU(50x60x12)
Manufacturer: KASTAS
Sizes: 50x60x12 (mm)

6.99 FKM 80(164,47x06,99)
Manufacturer: KASTAS

O-RING
Manufacturer: NQK SF
Sizes: 275.00x287.00x6.00 (mm)

D 132 32x3350 Li / 3426 Ld
Manufacturer: ContiTech AG

SEALS (REINFORCED SEAL) (FSS)
Manufacturer: FEKO
Sizes: 160x190x15.50/28 (mm)

ATG10 5310 MFX - Megaflex ( ATK10 5310 BFX - BRECOFLEX )
Manufacturer: ContiTech AG

AT5 DD
Manufacturer: ContiTech AG


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.