ContiTech AGDHTD 1328 D8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 1328 D8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 8 |
| Thickness | hs | мм | 8.2 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 1328 |
| Number of teeth |
166 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
ПОДШИПНИК КОМБИНИРОВАННЫЙ RTC200
Manufacturer: INA-FAG
Sizes: 200x300x15 (mm)
Weight:: 9.3 (kg)
AT10 1800 GEN III
Manufacturer: ContiTech AG
ПОДШИПНИК РОЛИКОВЫЙ РАДИАЛЬНЫЙ SL183014
Manufacturer: INA-FAG
Sizes: 70x110x30 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TCR)
Manufacturer: STO
Sizes: 25x38x7 (mm)
K85 PU(75x69,6x6,2 )
Manufacturer: KASTAS
Sizes: 75x69,6x6,2 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 71.00x81.60x5.30 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TC)
Manufacturer: STO
Sizes: 58x70x8.5 (mm)
Подшипник 6903DDU
Manufacturer: NSK-RHP
Sizes: 17x30x7 (mm)
Weight:: 0.017 (kg)
SEALS (REINFORCED SEAL) (AY)
Manufacturer: FEKO
Sizes: 290x314.50x9.90 (mm)
HTD 400 5M CXP
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
