ContiTech AGDHTD 1280 D8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 1280 D8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 8 |
| Thickness | hs | мм | 8.2 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 1280 |
| Number of teeth |
160 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
Mechanical seal RM 551-34
Manufacturer: RiMi
O-RING
Manufacturer: NQK SF
Sizes: 10.82x16.06x2.62 (mm)
Bearing K18x24x13
Manufacturer: INA-FAG
Sizes: 18x24x13 (mm)
Weight:: 0.0013 (kg)
Bearings NA49/32
Manufacturer: INA-FAG
Sizes: 32x52x20 (mm)
Weight:: 0.158 (kg)
O-RING
Manufacturer: NQK SF
Sizes: 72.62x79.72x3.55 (mm)
Bearing KBK14x18x21
Manufacturer: INA-FAG
Sizes: 14x18x21 (mm)
Weight:: 0.011 (kg)
A 124 13x3150 Li / 3180 Ld
Manufacturer: ContiTech AG
T5 DD
Manufacturer: ContiTech AG
T5 DD
Manufacturer: ContiTech AG
K14 NBR(type s)
Manufacturer: KASTAS
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
