ContiTech AGDHTD 1200 D8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 1200 D8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 8 |
| Thickness | hs | мм | 8.2 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 1200 |
| Number of teeth |
150 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
GEAR PULLEYS 8M-90S 227.58 (8M-90S 227.58/21)
Manufacturer: BBC
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 220x250x15 (mm)
ПОДШИПНИК РОЛИКОВЫЙ САМОУСТАНАВЛИВАЮЩИЙСЯ 21312-E1
Manufacturer: FAG
Sizes: 60x130x31 (mm)
Подшипник NJ 2238
Manufacturer: NACHI
Sizes: 190x340x92 (mm)
Weight:: 37.5 (kg)
ПОДШИПНИК ШАРИКОВЫЙ ЗАКРЕПЛЯЕМЫЙ GAY50-NPP-B
Manufacturer: INA-FAG
Sizes: 50x90x43 (mm)
T5 DD
Manufacturer: ContiTech AG
Подшипник 16017
Manufacturer: NSK-RHP
Sizes: 85x130x14 (mm)
Weight:: 0.652 (kg)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (DC)
Manufacturer: STO
Sizes: 42x58x12 (mm)
K68 POM(44,45x50,80x19,05 )
Manufacturer: KASTAS
Sizes: 44,45x50,80x19,05 (mm)
K06 NBR(25x33x7/5)
Manufacturer: KASTAS
Sizes: 25x33x7/5 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
