ContiTech AGDHTD 1200 D8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 1200 D8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 8 |
Thickness | hs | мм | 8.2 |
Tooth height | ht | мм | 3.4 |
Nominal length | Lp/Lw | мм | 1200 |
Number of teeth |
150 | ||
Minimum pulley diameter | dw | мм | 56.02 |
Mechanical seal RM 155-30
Manufacturer: RiMi

RPP14 DD 4098 MFX - Megaflex
Manufacturer: ContiTech AG

O-RING
Manufacturer: NQK SF
Sizes: 3.80x8.00x2.10 (mm)

Krestovina 35x103,9
Manufacturer: TOYO

MEGADYNE ISORAN 360 RPP8 ( RPP 8M 360 )
Manufacturer: ContiTech AG

SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 48x62x10 (mm)

K14 NBR(type a)
Manufacturer: KASTAS

1.78 FKM 80(107,70x01,78 )
Manufacturer: KASTAS

ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ 32038-X-XL-DF-A370-420
Manufacturer: FAG
Sizes: 190x290x128 (mm)

BX 118 BX 3040 Ld
Manufacturer: ContiTech AG


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.