ContiTech AGDHTD 1040 D8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 1040 D8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 8 |
Thickness | hs | мм | 8.2 |
Tooth height | ht | мм | 3.4 |
Nominal length | Lp/Lw | мм | 1040 |
Number of teeth |
130 | ||
Minimum pulley diameter | dw | мм | 56.02 |
K69 POM(41x38x20,8)
Manufacturer: KASTAS
Sizes: 41x38x20,8 (mm)

Корпус UCFL315
Manufacturer: NACHI
Weight:: 10.0 (kg)

SEALS (REINFORCED SEAL) (DY)
Manufacturer: FEKO
Sizes: 45.50x64.50x8 (mm)

MEGADYNE ISORAN 2384MXL
Manufacturer: ContiTech AG

K17X PTFE/NBR(370x345,5x8,1)
Manufacturer: KASTAS
Sizes: 370x345,5x8,1 (mm)

SEALS (REINFORCED SEAL) (BS)
Manufacturer: FEKO
Sizes: 90x110x13 (mm)

Подшипник NA5919
Manufacturer: NSK-RHP
Sizes: 95x130x46 (mm)
Weight:: 2 (kg)

DHTD 1424 D8M
Manufacturer: ContiTech AG

Bearing QJF209M
Manufacturer: TMB
Weight:: 0.43 (kg)

AT10 DD
Manufacturer: ContiTech AG


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.