ContiTech AGDHTD 912 D8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 912 D8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 8 |
| Thickness | hs | мм | 8.2 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 912 |
| Number of teeth |
114 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
Manufacturer: ContiTech AG
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD ()
Manufacturer: STO
O-RING
Manufacturer: NQK SF
Sizes: 18.20x22.00x1.90 (mm)
2.62 NBR 70(37,77x2,62)
Manufacturer: KASTAS
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНЫЙ 6203-2RSR
Manufacturer: FAG
Sizes: 17x40x12 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 35x54x10 (mm)
8V 2650
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 267.00x274.00x3.50 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 195.00x202.10x3.55 (mm)
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-СФЕРИЧЕСКИЙ 2215-K-TVH-C3
Manufacturer: FAG
Sizes: 75x130x31 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
