ContiTech AGDHTD 880 D8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 880 D8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 8 |
| Thickness | hs | мм | 8.2 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 880 |
| Number of teeth |
110 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
Bearing 3304 J-2RS
Manufacturer: INA-FAG
Sizes: 20x52x22.200 (mm)
Weight:: 0.230 (kg)
K33 PU(18x24x4,2)
Manufacturer: KASTAS
Sizes: 18x24x4,2 (mm)
Подшипник HR50KBE52X+L
Manufacturer: NSK-RHP
Sizes: 50x90x55 (mm)
Weight:: 1.39 (kg)
K17X PTFE/NBR(275x254x8,1)
Manufacturer: KASTAS
Sizes: 275x254x8,1 (mm)
Bearing 61903-ZP6 (E1060903)
Manufacturer: TMB
Sizes: 17x30x7 (mm)
Weight:: 0.016 (kg)
5.7 NBR 70(124,30x05,70)
Manufacturer: KASTAS
ПОДШИПНИК КОМБИНИРОВАННЫЙ YRT1030
Manufacturer: INA-FAG
Sizes: 1030x1300x40 (mm)
Weight:: 375 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 44x80x10 (mm)
MEGADYNE ISORAN 1472MXL
Manufacturer: ContiTech AG
Bearing SCH1612
Manufacturer: INA-FAG
Sizes: 25.400x33.338x19.050 (mm)
Weight:: 0.036 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
