ContiTech AGDHTD 720 D8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 720 D8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 8 |
Thickness | hs | мм | 8.2 |
Tooth height | ht | мм | 3.4 |
Nominal length | Lp/Lw | мм | 720 |
Number of teeth |
90 | ||
Minimum pulley diameter | dw | мм | 56.02 |
K35 PTFE/NBR(540x564x8,1 )
Manufacturer: KASTAS
Sizes: 540x564x8,1 (mm)

STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TGRY)
Manufacturer: STO
Sizes: 80x135x12/26 (mm)

Bearing RF56
Manufacturer: INA-FAG
Sizes: 28.575x88.900x52.390 (mm)
Weight:: 50.8 (kg)

Подшипник 7238DF
Manufacturer: NACHI
Sizes: 190x340x55 (mm)
Weight:: 21.5 (kg)

Подшипник F608
Manufacturer: NSK-RHP
Sizes: 8x25x7 (mm)
Weight:: 13.4 (kg)

ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНЫЙ 6201-2Z
Manufacturer: FAG
Sizes: 12x32x10 (mm)

Bearing LR608KDDU
Manufacturer: INA-FAG
Sizes: 8x24x7 (mm)
Weight:: 7 (kg)

SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 15.50x28.50x6.30 (mm)

SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 44.45x76.22x17.70 (mm)

Корпус UKPX06+H2306
Manufacturer: NACHI
Weight:: 2 (kg)


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.