ContiTech AGDHTD 656 D8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 656 D8M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 8 |
| Thickness | hs | мм | 8.2 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 656 |
| Number of teeth |
82 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
K33 PU(63x78x10 )
Manufacturer: KASTAS
Sizes: 63x78x10 (mm)
5.33 NBR 90(043,82x05,33)
Manufacturer: KASTAS
K752 PTFE/NBR(90x79x4,2)
Manufacturer: KASTAS
Sizes: 90x79x4,2 (mm)
SEALS (REINFORCED SEAL) (A)
Manufacturer: FEKO
Sizes: 412.75x451.05x17.46 (mm)
T5 DD
Manufacturer: ContiTech AG
RPP8 DD 4108 MFX - Megaflex
Manufacturer: ContiTech AG
K21 NBR(9x17x5,5)
Manufacturer: KASTAS
Sizes: 9x17x5,5 (mm)
2.62 NBR 70(15,54x2,62)
Manufacturer: KASTAS
K54 NBR(35x26x3)
Manufacturer: KASTAS
Sizes: 35x26x3 (mm)
AT20 DD
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
