ContiTech AGDHTD 900 D5M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 900 D5M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 5.4 |
| Tooth height | ht | мм | 2.1 |
| Nominal length | Lp/Lw | мм | 900 |
| Number of teeth |
180 | ||
| Minimum pulley diameter | dw | мм | 22.28 |
CX 92 CX 2402 Ld
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (ARS)
Manufacturer: FEKO
Sizes: 45x60x10 (mm)
AT3 639 F E3/8
Manufacturer: ContiTech AG
SPA 3750
Manufacturer: ContiTech AG
HTD 8M 6088 ( HTD8M 6088 -V, -M, -MFX )
Manufacturer: ContiTech AG
ПОДШИПНИК РОЛИКОВЫЙ РАДИАЛЬНЫЙ NUP319-E-TVP2
Manufacturer: FAG
Sizes: 95x200x45 (mm)
K11 TPE(32x40x5/8)
Manufacturer: KASTAS
Sizes: 32x40x5/8 (mm)
AT20 DD
Manufacturer: ContiTech AG
K38 PU(108x116x8)
Manufacturer: KASTAS
Sizes: 108x116x8 (mm)
BB262 ( ВВ 262 ) Le= 6724 мм
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
