ContiTech AGDHTD 840 D5M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 840 D5M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 5.4 |
| Tooth height | ht | мм | 2.1 |
| Nominal length | Lp/Lw | мм | 840 |
| Number of teeth |
168 | ||
| Minimum pulley diameter | dw | мм | 22.28 |
SPA 1000 Ld
Manufacturer: ContiTech AG
ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ 33209
Manufacturer: FAG
Sizes: 45x85x32 (mm)
L 480 MEGADYNE MEGAPOWER
Manufacturer: ContiTech AG
K06 NBR(160x172x12/7,5)
Manufacturer: KASTAS
Sizes: 160x172x12/7,5 (mm)
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 57x76.25x9.50 (mm)
Подшипник NF 421
Manufacturer: NACHI
Sizes: 105x220.5x60 (mm)
Weight:: 19.1 (kg)
Mechanical seal RM E - 5/8" H
Manufacturer: RiMi
GEAR PULLEYS 14M-192S 852.82 (14M-192S 852.82/37)
Manufacturer: BBC
AT20 ( АТ20 )
Manufacturer: ContiTech AG
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
