ContiTech AGDHTD 600 D5M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP DHTD 600 D5M
Trademark : CONTI® SYNCHROTWIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 5.4 |
| Tooth height | ht | мм | 2.1 |
| Nominal length | Lp/Lw | мм | 600 |
| Number of teeth |
120 | ||
| Minimum pulley diameter | dw | мм | 22.28 |
O-RING
Manufacturer: NQK SF
Sizes: 60.00x63.00x1.50 (mm)
XL 140 MEGADYNE MEGAPOWER
Manufacturer: ContiTech AG
4 NBR 70(126,00x04,00)
Manufacturer: KASTAS
5V 670 / 15J 1702 Le
Manufacturer: ContiTech AG
Bearing SCE5612
Manufacturer: INA-FAG
Sizes: 88.900x101.600x19.050 (mm)
Weight:: 0.186 (kg)
8V 4750 / 25J 12065 Le
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 10x27x6.25 (mm)
Manufacturer: ContiTech AG
K22 PU(25x32x5,5 )
Manufacturer: KASTAS
Sizes: 25x32x5,5 (mm)
Bearing WS81156
Manufacturer: INA-FAG
Sizes: 280x350x15.5 (mm)
Weight:: 3.650 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
