ContiTech AGCTD 3920 C14M EXTREME
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP CTD 3920 C14M EXTREME
Trademark : CONTI® SYNCHROFORCE EXTREME
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Nominal length | Lp/Lw | мм | 3920 |
T20 DD
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 13.90x17.90x2.00 (mm)
Подшипник 7224CTRSU
Manufacturer: NSK-RHP
Sizes: 120x215x40 (mm)
Weight:: 5.426 (kg)
SEALS (REINFORCED SEAL) (A)
Manufacturer: FEKO
Sizes: 50.80x70.15x9.52 (mm)
Подшипник 23968CAKE4
Manufacturer: NSK-RHP
Sizes: 340x460x90 (mm)
Weight:: 42.4 (kg)
2.5 NBR 90(006,00x02,50)
Manufacturer: KASTAS
Подшипник 6218N
Manufacturer: NACHI
Sizes: 90x160x30 (mm)
Weight:: 2.15 (kg)
Подшипник 319428 DA-2LS
Manufacturer: SKF
Sizes: 140x200x80 (mm)
Weight:: 8.00 (kg)
Подшипник MF-5024
Manufacturer: NSK-RHP
Sizes: 50x58x24 (mm)
Weight:: 0.11 (kg)
SEALS (REINFORCED SEAL) (SC)
Manufacturer: FEKO
Sizes: 76x89x11 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.