ContiTech AGSTD 720 8M EXTREME
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP STD 720 8M EXTREME
Trademark : CONTI® SYNCHROFORCE EXTREME
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Nominal length | Lp/Lw | мм | 720 |
HTD 8M 1872 ( HTD8M 1872 -V, -M, -MFX )
Manufacturer: ContiTech AG
K75 PHENOLIC(100x105x25)
Manufacturer: KASTAS
Sizes: 100x105x25 (mm)
SEALS (REINFORCED SEAL) (FY)
Manufacturer: FEKO
Sizes: 60x75x4 (mm)
Подшипник 23268EK
Manufacturer: NACHI
Sizes: 340x620x224 (mm)
Weight:: 299 (kg)
Bearing HK0609
Manufacturer: ETERNO
Sizes: 6x10x9 (mm)
Weight:: 0.0025 (kg)
Подшипник NU 317
Manufacturer: NACHI
Sizes: 85x180x41 (mm)
Weight:: 4.54 (kg)
Подшипник 7018 C
Manufacturer: NSK-RHP
Sizes: 90x140x24 (mm)
Weight:: 1.34 (kg)
Подшипник L521949/L521910
Manufacturer: NACHI
Sizes: 107.950x146.050x21.433 (mm)
Weight:: 0,965 (kg)
AT10 DD
Manufacturer: ContiTech AG
Bearing GH035020
Manufacturer: GMB
Sizes: 35x62x37/37 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
