ContiTech AGHTD 2590 14M EXTREME
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP HTD 2590 14M EXTREME
Trademark : CONTI® SYNCHROFORCE EXTREME
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Nominal length | Lp/Lw | мм | 2590 |
SEALS (REINFORCED SEAL) (FYZ)
Manufacturer: FEKO
Sizes: 48x58x11/12 (mm)

Подшипник 21310EAKE4
Manufacturer: NSK-RHP
Sizes: 50x110x27 (mm)
Weight:: 1.21 (kg)

RPP8 2432 ( RPP 8 2432 -V, -M, -MFX )
Manufacturer: ContiTech AG

Подшипник 23134CKE4
Manufacturer: NSK-RHP
Sizes: 170x280x88 (mm)
Weight:: 21.8 (kg)

K21 NBR(61x80x12)
Manufacturer: KASTAS
Sizes: 61x80x12 (mm)

Подшипник NJ 2317 ET
Manufacturer: NSK-RHP
Sizes: 85x180x60 (mm)
Weight:: 6.77 (kg)

Bearing FT41
Manufacturer: INA-FAG
Sizes: 76.200x119.863x25.400 (mm)
Weight:: 0.907 (kg)

Подшипник 7308CDB
Manufacturer: NACHI
Sizes: 40x90x23 (mm)
Weight:: 0.655 (kg)

O-RING
Manufacturer: NQK SF
Sizes: 16.00x18.50x1.25 (mm)

C 117 22x2971 Li / 3030 Ld
Manufacturer: ContiTech AG


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.