ContiTech AGHTD 1890 14M EXTREME
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP HTD 1890 14M EXTREME
Trademark : CONTI® SYNCHROFORCE EXTREME
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Nominal length | Lp/Lw | мм | 1890 |
K21 NBR(32x48x10 )
Manufacturer: KASTAS
Sizes: 32x48x10 (mm)
5L 610
Manufacturer: ContiTech AG
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (HTCL)
Manufacturer: STO
Sizes: 76x94x8.5 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 58x72x10 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 58.00x60.00x1.00 (mm)
SEALS (REINFORCED SEAL) (SC)
Manufacturer: FEKO
Sizes: 98x125/132x8.50/10 (mm)
Bearing 51117
Manufacturer: ETERNO
Sizes: 85x110x19 (mm)
Weight:: 0.44 (kg)
SEALS (REINFORCED SEAL) (FH)
Manufacturer: FEKO
Sizes: 25.40x38.10x32 (mm)
K73 POLYESTER/PTFE(200x208x15)
Manufacturer: KASTAS
Sizes: 200x208x15 (mm)
B 195 17x4955 Li / 5000 Ld
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
