ContiTech AGHTD 3808 8M EXTREME
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP HTD 3808 8M EXTREME
Trademark : CONTI® SYNCHROFORCE EXTREME
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Nominal length | Lp/Lw | мм | 3808 |
SEALS (REINFORCED SEAL) (FH)
Manufacturer: FEKO
Sizes: 50.60x60.30x6.50 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 38x54x8 (mm)
K781 PTFE(60x65x30 )
Manufacturer: KASTAS
Sizes: 60x65x30 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD ()
Manufacturer: STO
Sizes: 14x25/35x20 (mm)
SEALS (REINFORCED SEAL) (ARS)
Manufacturer: FEKO
Sizes: 60x85x10 (mm)
Manufacturer: ContiTech AG
K06 NBR(16x22x3,5/5)
Manufacturer: KASTAS
Sizes: 16x22x3,5/5 (mm)
K75 PHENOLIC(145x150x9,7)
Manufacturer: KASTAS
Sizes: 145x150x9,7 (mm)
K25 NBR/Metal(31,75x6,35x14,29)
Manufacturer: KASTAS
Sizes: 31,75x6,35x14,29 (mm)
SEALS (REINFORCED SEAL) (AST)
Manufacturer: FEKO
Sizes: 27x37x7.50/10 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
