ContiTech AGHTD 1760 8M EXTREME
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP HTD 1760 8M EXTREME
Trademark : CONTI® SYNCHROFORCE EXTREME
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Nominal length | Lp/Lw | мм | 1760 |
Bearing S2012
Manufacturer: INA-FAG
Sizes: 31.750x38.100x19.050 (mm)
Weight:: 0.039 (kg)
SEALS (REINFORCED SEAL) (ARS)
Manufacturer: FEKO
Sizes: 30x50x10 (mm)
Корпус UCFL306
Manufacturer: NACHI
Weight:: 1.5 (kg)
ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ 32040-X-N11CA
Manufacturer: FAG
Sizes: 200x310x140 (mm)
K09 NBR(23x31x4/7)
Manufacturer: KASTAS
Sizes: 23x31x4/7 (mm)
SPZ 1950
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 75x95x10 (mm)
ПОДШИПНИК РОЛИКОВЫЙ РАДИАЛЬНЫЙ NJ2232-E-M1 + HJ2232-E
Manufacturer: FAG
Sizes: 160x290x80 (mm)
Подшипник MFJ-3520
Manufacturer: NSK-RHP
Sizes: 35x42x20 (mm)
Weight:: 0.045 (kg)
XPA 2310 Lw / Ld ( ХРА 2310 )
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
