ContiTech AGHTD 656 8M EXTREME
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP HTD 656 8M EXTREME
Trademark : CONTI® SYNCHROFORCE EXTREME
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Nominal length | Lp/Lw | мм | 656 |
Подшипник RNA49/22
Manufacturer: NSK-RHP
Sizes: 28x39x17 (mm)
Weight:: 0.056 (kg)
K69 POM(110x105x9,5)
Manufacturer: KASTAS
Sizes: 110x105x9,5 (mm)
HTD 8M 6592 ( HTD8M 6592 -V, -M, -MFX )
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (BS)
Manufacturer: FEKO
Sizes: 600x640x20 (mm)
ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ RME90
Manufacturer: INA-FAG
K21 NBR(12,7x19,05x3,18)
Manufacturer: KASTAS
Sizes: 12,7x19,05x3,18 (mm)
Подшипник 54244XU
Manufacturer: NSK-RHP
Sizes: 220x300x134 (mm)
Weight:: 0.73 (kg)
SEALS (REINFORCED SEAL) (A)
Manufacturer: FEKO
Sizes: 20x37x10 (mm)
ATG10 1680 MFX - Megaflex ( ATK10 1680 BFX - BRECOFLEX )
Manufacturer: ContiTech AG
HTD 8M 3704 ( HTD8M 3704 -V, -M, -MFX )
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
