ContiTech AGSTD 528 S8M CXP
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP STD 528 S8M CXP
Trademark : CONTI® SYNCHROFORCE CXP
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 5.3 |
| Tooth height | ht | мм | 2.95 |
| Nominal length | Lp/Lw | мм | 528 |
| Number of teeth |
66 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
| Max line speed | Vmax | м/c | 50 |
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-УПОРНЫЙ 7213-B-TVP
Manufacturer: FAG
Sizes: 65x120x23 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 57x75x12 (mm)
K36 (50x60x10)
Manufacturer: KASTAS
Sizes: 50x60x10 (mm)
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 145x165x15 (mm)
AX 97 AX 2494 Ld
Manufacturer: ContiTech AG
MEGADYNE ISORAN 3104MXL
Manufacturer: ContiTech AG
K14 NBR(type a)
Manufacturer: KASTAS
Подшипник 130TAH10DB
Manufacturer: NACHI
Sizes: 130x200x31.5 (mm)
STD 1624 S8M
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
